[ Order a Server ] [ Server Support ]

[ Getting Started ] [ Server Help ] [ Add on Help ] [ Solution ] [ Trouble Shooting ]

PLEASE NOTE, THIS IS VERY OLD ARCHIVE INFORMATION AND MAY NOT FUNCTION ON NEW SERVERS

Installing RealNetworks Basic Server G2 for FreeBSD

1. Create an install directory for the Basic Server G2:

   % cd
   % mkdir usr/local/realserverg2
   

2. Download the Basic Server G2 free software from the RealNetworks web site. Be sure to select "FreeBSD 3.0" as the O/S. Upload (in Binary format) the software to your new Basic Server G2 install directory.

3. If you entered the registration information correctly when downloading the Basic Server G2 software, a RealServer license key file will be e-mailed to you by RealNetworks. Upload the license key file (it was probably sent as an attachment to the e-mail sent by RealNetworks) to your new Basic Server G2 install directory.

4. Run the Basic Server G2 setup utility. Type:

   % cd usr/local/realserverg2
   % chmod 755 g2p3-freebsd-3_0.bin
   % ./g2p3-freebsd-3_0.bin
   

Please review the setup guidelines described below for help concerning specific questions the setup utility will ask you.

Setup Guidelines

• When the setup utility prompts you for a directory path you must enter the full pathname to your Virtual Server, like /usr/home/LOGIN/usr/local/realserverg2. Do not use a path like ~/usr/local/realserverg2.

• For the user name and password, we suggest that you use your Virtual Server login and password.

• You can accept the default port for RealServer PNA (7070) and HTTP (8080) requests. A RealSystem Administrator port number will be randomly generated. Just make sure you don't introduce any port conflicts. For all of the ports, you must choose a port number greater than 1024. Here are some suggestions:

  RTSP Port:              5540
  Admin Port:             4574
  

• Please watch carefully. You see the RTSP port? When installation is started the "default" that comes up for that will be '554'. Type: 5540

• The Admin Port will be some random number that realserverG2 produces. Change it to 4574.

• When the setup utility gives you the option to start the Basic Server G2 and RealSystem Administrator, type "No". Before you can start the Basic Server G2 you must make one other addition to the configuration file (~/usr/local/realserverg2/rmserver.cfg). Add the following lines at the "very" end of the file, substituting your Virtual Server IP address for YOUR.IP.ADD.RESS:

  <List Name="IPBindings">
    <Var Address_01="YOUR.IP.ADD.RESS"/>
  </List> 
  

• BEFORE you proceed to the next step, ftp into your server and upload your license key that you recieved from RealNetworks to this directory:
  
  /usr/local/realserverg2/License
  
  This directory was created after your initial installation. Otherwise, when you go to start the G2 Server it will not find the license and attempt to install the Basic and not G2!

Starting Basic Server G2

% cd ~/usr/local/realserverg2
% Bin/rmserver rmserver.cfg &

To make sure that Basic Server G2 is running correctly, connect to the RealSystem Administrator using the following URL:

http://YOUR-DOMAIN.NAME:4574/admin/index.html

"4574" is the default setting for the RealSystem Administrator port. If you chose a different port number while running the setup utility, you will need to substitute that number.

From the menu you should see on the left, choose "Samples". If you have already installed a RealPlayer G2 on your own computer, you can then attempt to play one of the sample Real Media clips.

You should add Basic Server G2 to your Rc file (~/etc/rc) so that it will automatically start in case of a host machine reboot.

~/usr/local/realserverg2/Bin/rmserver ~/usr/local/realserverg2/rmserver.cfg &

Serving Real Media

PLEASE NOTE, THIS IS OLD ARCHIVE INFORMATION AND MAY NOT FUNCTION ON NEW SERVERS